Q1: Which motorcycle models are compatible with JADO S1? A1: JADO S1 is designed to be compatible with most motorcycle models, including street bikes, cruisers, and sport bikes. Please confirm compatibility based on handlebar diameter, triple tree specifications, and installation space.

Q2: What tools are needed for installation? A2: Basic tools include: hex key set, Phillips screwdriver, flathead screwdriver, torque wrench, optional thread locker.

Q3: How long does installation take? A3: Depending on installation method:

• Standard handlebar mount: 15-30 minutes
• Triple tree mount: 30-45 minutes
• Bracket package mount: 10-20 minutes

Method 1: Standard Handlebar Mount Bracket

Q4: What handlebar diameters does the mount support? A4: Standard bracket fits 22mm and 25.4mm (1 inch) diameter handlebars, with adjustment shims for different specifications.

Q5: Will handlebar mounting affect steering? A5: Proper installation won't affect steering. Ensure:

• Device doesn't interfere with dashboard, switches or cables
• Leave sufficient steering clearance
• Test full steering range

Q6: Will the handlebar clamp loosen after installation? A6: Tighten to correct torque (typically 8-12Nm) and check regularly. Recommend using medium-strength thread locker.

Q7: How to choose the best installation position on handlebars? A7: Recommended installation position:

• 15-20cm from handlebar center
• Doesn't block vision or instruments
• Convenient operation without affecting grips
• Avoid switches and cables

Method 2: Triple Tree Mount Bracket

Q8: What are the advantages of triple tree mounting? A8: Triple tree mounting advantages:

• More stable with better shock absorption
• Doesn't occupy handlebar space
• Better visibility and operation
• More professional appearance

Q9: What components need removal for triple tree installation? A9: Usually requires:

• Removing upper triple tree bolts
• May need to remove instruments or fairings
• Some models require handlebar removal

Q10: What if my motorcycle's triple tree specifications are non-standard? A10: For special specifications:

• Measure triple tree bolt spacing
• Confirm bolt diameter and thread pitch
• Contact customer service for compatibility
• Consider using adapters

Q11: Will triple tree installation affect vehicle warranty? A11: Usually won't affect warranty, but recommend:

• Consult dealer before installation
• Keep original parts
• Have professional technician install
• Keep installation records

Method 3: Product Included Bracket Package

Q12: What is the bracket package and how to use it? A12: The bracket package is a simple installation solution included with the product:

• Secures to handlebars via rubber sleeves
• Quick and easy installation
• Suitable for temporary use
• Most cost-effective mounting method

Q13: How stable is the bracket installation? A13: Bracket installation is relatively simple:

• Suitable for flat roads and low-speed riding
• Recommend regular tightness checks
• Not suitable for aggressive riding
• Requires extra attention on bumpy roads

Q14: What are the limitations of bracket installation? A14: Usage limitations include:

• Strict handlebar diameter matching required
• Not suitable for long-term outdoor exposure
• Relatively limited load capacity
• General shock absorption effect

Troubleshooting and Precautions

Q15: What if device vibrates too much after installation? A15: Methods to reduce vibration:

• Check if installation is secure
• Add shock absorption pads
• Confirm correct torque specifications
• Consider changing installation position

Q16: Will the device get water damage in rain? A16: JADO S1 has waterproof design, but recommend:

• Check seal integrity
• Clean device regularly
• Avoid high-pressure water direct contact
• Dry water stains promptly

Q17: How to perform daily maintenance? A17: Maintenance recommendations:

• Check fasteners every 500km
• Clean device surface regularly
• Check cable connections
• Update software versions

Q18: How to get technical support when installation problems occur? A18: Technical support channels:

• Check product manual
• Visit official website FAQ
• Contact online customer service
• Find local authorized installers

Pre-installation Checklist

Q19: What preparations are needed before installation? A19: Pre-installation preparations:

• Confirm vehicle compatibility
• Prepare necessary tools
• Read installation instructions
• Choose appropriate installation method
• Reserve sufficient time
• Prepare work area

Q20: How to choose the most suitable installation method for my motorcycle? A20: Selection recommendations:

• Bracket package: temporary use, limited budget
• Handlebar mount: balance cost and stability
• Triple tree mount: best experience, long-term use